Corniel Construction is a Manhattan general contractor for the shared spaces of residential buildings: corridors, hallways, elevator landings, lobbies and vestibules in co-ops and condominiums. A common-area renovation is the first and last thing every resident and guest sees, and it is built while the building stays fully occupied. We plan each project around the board, the managing agent and the people who live there.
Schedule a Private Consultation or call .
Common-Area Work in Occupied Manhattan Buildings
A corridor or lobby renovation is approved and scheduled differently from an apartment interior. An apartment remodel belongs to one shareholder or unit owner; a common area belongs to the whole building. The decision usually rests with the co-op board or the condominium board of managers, the work is coordinated through the managing agent, and day-to-day access runs through the superintendent and staff.
Because residents still need to come and go, a hallway or lobby cannot simply be closed for the duration. Entrances, mail, deliveries, elevators and the route to every apartment door have to stay usable. That shapes the sequence of the work, the hours it can happen and the way finished areas are handed back floor by floor.
Co-op and Condo Board Requirements
Most Manhattan buildings set out how contractors may work in their house rules and, for larger scopes, in an alteration agreement or a building-specific contractor agreement. Common requirements include:
- A defined written scope and drawings or finish selections for the board or its architect to review.
- A certificate of insurance (COI) naming the parties the building specifies, issued before work begins.
- Permitted work hours, noise limits and rules for elevator and freight use.
- A single point of contact who coordinates with the managing agent and the superintendent.
- Notice to residents before disruptive phases, and a plan for keeping access open.
Every building has its own rules, and they change from one property to the next. Our guide to Manhattan renovation building rules explains the typical documents, and our Manhattan co-op renovation and Manhattan condo renovation pages describe how board-driven projects are organized. Where a scope needs filings with the city, the renovation permit guide covers the general process; the building’s architect or engineer determines what applies to a specific project.
Typical Scope for a Hallway, Corridor or Lobby
Common-area interiors vary widely, from a refresh of a single floor’s corridor to a coordinated renovation of the lobby and every residential hallway above it. Typical elements include:
- Corridor walls and ceilings: plaster repair, wall finishes, trim and moldings, and ceiling work.
- Lighting: new or updated corridor and lobby fixtures, coordinated with the building’s licensed electrician.
- Flooring: replacement or restoration of hallway and lobby floors, including transitions at apartment thresholds and elevator sills.
- Apartment-entry doors and frames: finish upgrades and consistent hardware along each corridor, within the building’s requirements for those doors.
- Elevator landings: finishes, lighting and wall treatments at each floor’s arrival point.
- Lobby and vestibule: wall and floor finishes, the lobby desk, mail area and entry vestibule.
Shared spaces in residential buildings are subject to fire-safety, egress and accessibility requirements that do not apply in the same way inside an apartment. Exit routes, fire-rated doors, signage, clear widths and accessibility features may limit what can change and how. We identify these constraints early so the design team and the building’s professionals can confirm what is required; this page is general information, not legal or code advice.
Logistics in a Live Building
In an occupied co-op or condominium, the logistics plan matters as much as the finishes. Before work starts we agree with management on:
- Freight and elevator use: reserved times for deliveries and debris removal, with elevator cabs and landings protected.
- Dust containment: sealed work zones, protected floors and clean walkways for residents passing through.
- Work hours: scheduling noisy and dusty tasks within the building’s permitted hours.
- Protecting finished areas and units: covering completed sections and keeping apartment entrances clean and accessible.
- Daily cleanup: leaving shared spaces safe and orderly at the end of each working day.
Our article on renovation logistics in Manhattan buildings covers these practices in more detail.
How a Common-Area Project Is Planned
Each common-area renovation follows a clear sequence, so the board and management know what to expect at every step:
- Consultation and walkthrough: we review the corridors, landings and lobby with the board representative, managing agent or superintendent, and discuss goals, constraints and any existing design.
- Scope definition: we document the work area by area, so finishes, quantities and responsibilities are clear.
- Board package: we assemble the information the building asks for, such as the scope, schedule outline, insurance documentation and contractor details.
- Phasing: we organize the work floor by floor or zone by zone so residents keep a usable route at all times, with the lobby typically planned around the building’s busiest hours.
- Execution and closeout: work proceeds under one point of contact, with each area reviewed with management as it is completed.
To begin, schedule a consultation and tell us about the building, the spaces involved and the board’s priorities. For a wider view of our services, see our Manhattan general contractor overview and our apartment renovation in Manhattan page.
Project Example: Greenwich Village Common Hallway, 2015
Our project archive includes a documented record of common-hallway renovation work at a multifamily building in Greenwich Village. Dated January 2015 progress photographs show the corridor during the finishing phase, including decorative wall trim, lighting, flooring and door-threshold details. The building and resident identities are withheld, and the images record work in progress rather than final closeout. It is an archival example of the kind of shared-corridor work described on this page.
Start a Hallway or Lobby Renovation
If your co-op board or condominium board is considering a corridor, hallway or lobby renovation, we would be glad to walk the building with you and discuss the scope.
Corniel Construction LLC
500 W 176th St, New York, NY 10033
Phone:
Licensed & Insured – NYC DCWP HIC #2090614-DCA
